Φίλτρο υπερδιήθησης 480.000 λίτρα / ημέρα

Φίλτρο υπερδιήθησης 480.000 λίτρα / ημέρα

Μάρκα: Creta Pure
Κωδικός Προϊόντος: UF20
Διαθεσιμότητα:
Προ-Παραγγελία
Τιμή: 0,00€ Άνευ ΦΠΑ: 0,00€

Operational characteristics and technical data

Nominal capacity

m3/h

20

Recommended operating pressure

bar

2...3

Maximum pressure

bar

6

Required level of preliminary purification from sediments

micron

150...200

Maximum water temperature

°C

not more than 40

Recommended pressure of BW

bar

1.5

Recommended water supply of BW

m3/hour

40

Recommended pressure of compressed air

bar

1.5...2.0

Maximum pressure of BW and compressed air

bar

2.5

Recommended supply of compressed air

nm3/hour

50

Connection port size:

   
  • water inlet

 

DN 80

  • permeate

 

DN 65

  • concentrate/drain

 

DN 100

  • inlet and outlet of cleaning water

 

DN 100

  • air inlet

 

DN 50

  • CIP inlet

 

DN 40

  • CIP outlet

 

DN 40

Operating temperature

°C

10…25

Relative humidity, not more than

%

75

Electrical capacity

kW

0.5

Block dimensions (L x W x H)

mm

3000 x 1500 x 3200

Ultrafiltration is the method of fine water filtration. Application of the DOW™ UF ultrafiltration modules with hollow fibers made of the unique H-PVDF material provides almost complete removal of colloidal particles, majority of bacteria and viruses from the water, as well as reduction of color and oxidation of natural surface waters.

The tiniest pores of the ultrafiltration membrane sized 0.03 micron guarantee reduction of all the larger impurities, i.e. microbiological contaminants, suspended solids and large molecules of natural organic matter. Along with that, high porosity and innovation technology of the membranes production provide higher efficiency with low working pressures and save energy.

The ultrafiltration membrane elements are highly endurable and chemically resistant. Hence, it is possible to clean the elements with decontamination, alkaline and acid reagents, and to employ them long-term within harsh conditions.

Operation of the plant is periodical, the main operation mode is presented by filtration when purified water is supplied to the permeate tank. Approximately every 40-60 minutes the plant shifts to the flush mode (BW mode).

The cleaning is performed by the pump of the BW station which supplies the purified water from the permeate tank to the proper port of the module. The washing lasts about 2 minutes, and consists of several stages. One of the stages is blowing with compressed air. At regular intervals dosing of reagents for current chemical cleaning (CIP-cleaning) has to be supplied into the washing water. Automatic management of shifting the operation modes of the plant is provided by the controller and the set of automatic valves. 

Approximately once a month the plant switches off the filtration process, and the chemical cleaning (CIP-cleaning) of the module with the CIP-station is performed manually.

Φίλτρο υπερδιήθησης 480.000 λίτρα / ημέρα.

The Creta Pure UF industrial ultrafiltration systems with capacity of 18-20 m3/hour are intended to purify water from suspended and colloidal particles, as well as organic and microbiological impurities. Most common application of these systems:

  • clarification of surface waters for water supply to enterprises and residential areas

  • pre-treatment of surface waters for industrial reverse osmosis systems

The Creta Pure UF systems are automated, and do not require constant attention of staff for the stages of filtration and washing.

Key advantages:

  • stable and reliable reduction of suspended and colloidal particles regardless of temperature and without any reagents

  • require space 2-4 times less than for traditional solutions

  • full automation and dispatching control of the equipment

  • effective solution for pre-treatment of surface waters for reverse osmosis systems

  • easy-to-use and maintain

Σχετικά Προϊόντα